Faculty – School of Engineering

Dr. O’Malley earned his doctorate in 2012 from the Catholic University of America. He specialized in laser Doppler vibrometry- a technique for making vibration measurements using a laser beam. He has published his research in peer-reviewed journals and presented work at numerous conferences. He participated in research at Catholic University developing an acoustic imaging system for detection of roadside explosives, an apparatus for detecting buried landmines based on their vibration signature, and characterization of a Caribbean seelpan vibration pattern.

During his time in Washington, O’Malley also worked for a contractor at NASA’s Goddard Spaceflight Center where he was on the analysis team for Hubble Space Telescope’s Wide Field Camera 3 instrument and UVIS instrument. Other projects at NASA included analysis of the ICES at failure and development of robotic satellite servicing capability.

At Benedictine, Dr. O’Malley teaches General and Mechanical Engineering courses including Statics, Dynamics, Design of Machinery, System Dynamics and Control, Mechanical Measurement Lab, Robotics and Finite Element Analysis. He was awarded the Outstanding Teaching Award in 2019 by the American Society of Engineering Education MidWest Section.

Degrees

• BME, Mechanical Engineering, The Catholic University of America, 2006
• MME, Mechanical Engineering, The Catholic University of America, 2007
• Ph.D, Mechanical Engineering, The Catholic University of America, 2012

Dr. Muggli is a Professor and the Chair of the School of Engineering at Benedictine College. He graduated with a B.S. in chemical engineering from the University of North Dakota in 1992. Subsequently, he worked for two years as a Process Engineer for Koch Engineering Co. in Wichita, KS. He entered graduate school at the University of Colorado at Boulder where he earned his doctorate in 1998, specializing in catalysis.

Dr. Muggli was a faculty member at the University of North Dakota from 1999 – 2009. During that time he was awarded over four million dollars in research funding, published 30 peer-reviewed articles, and has given numerous research presentations.  He holds three patents, received a university-wide award for excellence in undergraduate teaching, was voted 2007 Professor of the Year in the School of Engineering, and received a 2009 award for excellence in teaching, research, and service.

Degrees

• BS in Chemical Engineering, University of North Dakota, 1992
• Ph.D in Chemical Engineering, University of Colorado, 1998

Dr. Newbolds has taught at Benedictine since 2012.  His classes focus mainly on structural design, engineering mechanics, and engineering materials.  He has served co-advisor to the concrete canoe team and ASCE student chapter.  Additionally, Dr. Newbolds has served as advisor to the engineering mission trip.  His research interests are in concrete materials, corrosion of steel in concrete, and the integration of Catholic teachings and the engineering profession. 

Dr. Newbolds started his career as a Project Engineer for the Indiana Department of Transportation (INDOT) in 1995. While working in the INDOT Research and Development office, he received his Ph.D. from Purdue University in 2006.  In 2009, he began work as the Director of Site Operations for the Network for Earthquake Engineering Simulation (NEES). Dr. Newbolds is a registered Professional Engineer in the State of Indiana.

Degrees

• BS in Civil Engineering, Purdue University, 1995
• MSCE in Civil Engineering, Purdue University, 2000
• PhD in Civil Engineering, Purdue University, 2007

Dr. Sprouse earned a physics degree from Benedictine College in 2007. He then began engineering studies at the University of Kansas, and following a bachelor’s degree in 2009, he joined the doctoral program and earned his Ph.D. in 2016. During the course of his engineering studies, he worked in consulting engineering and collaborated with some of the world’s leading automotive/transportation research organizations. Dr. Sprouse’s research has been published in numerous peer-reviewed journals, presented at academic conferences, and he has moderated for academic panels. His research areas include diesel particulate filters, organic Rankine cycles, waste heat recovery, adaptive information displays for automotive applications, materials testing, artificial intelligence in transportation, advanced pavement systems, and environmental stewardship. He began teaching part-time at Benedictine College in 2011 and returned to his alma mater on a full-time basis in 2013.

Degrees

• BA in Physics, Benedictine College, 2007
• BS in Mechanical Engineering, University of Kansas, 2009
• Ph. D. in Mechanical Engineering, University of Kansas, 2016

Dr. Blonigen joined the Benedictine School of Engineering in 2015.  His teaching responsibilities include the freshman introduction to engineering course and the chemical engineering senior design and process controls courses.  Dr. Blonigen is the faculty advisor for the Benedictine student chapter of the American Institute of Chemical Engineers (AIChE).

Before joining the Benedictine faculty, Dr. Blonigen spent over 20 years doing process and product development work for companies including Kraft Foods, Nestlé, Scotts Miracle-Gro, Mead Johnson Nutritionals, and Hills Pet Nutrition and consulting work for the Battelle Memorial Institute.  Dr. Blonigen is a licensed professional engineer (Ohio).

Degrees

• BS, Chemical Engineering, Rose-Hulman Institute of Technology, 1986
• MS, Chemical Engineering, The Pennsylvania State University, 1989
• Ph.D, Chemical Engineering, Iowa State University, 1994

Dr. Paciaroni comes to Benedictine from Fort Lewis College in Durango, CO where she was an associate professor in the Engineering and Physics Department. Dr. Paciaroni was very involved in development of undergraduate research opportunities at Fort Lewis, and hopes to bring that expertise to School of Engineering at Benedictine College. Her research interests include laser diagnostics in combustion systems.

Degrees

• BS, Optics, University of Houston, TX Electro 1987
• MS, Electrical Engineering, State University of New York at Binghamton, NY 1993
• Ph.D, Electrical Engineering, Colorado School of Mines, Golden CO Engineering Systems 2004

Dr. John Rogers joined the Benedictine College School of Engineering in 2022. He has a range of engineering and teaching experience. As an ocean engineer, he developed towed systems for underwater listening, and structures that reduce ship noise. As a structural engineer, he verified the strength of foundations for shipboard equipment. As a design engineer he developed fluid power systems and designed industrial controls for aircraft and automobile plants. As a college instructor, he taught a variety of courses in design, mechanics, and mechatronics, and he advised numerous capstone projects and independent studies.

Dr. Rogers’ PhD research work at Rensselaer was the optimization of stepper controls to reduce unwanted dynamics in machinery. He was awarded a patent for this work. His scholarly interests include microcontroller-based system design, biomechanics, instrumentation, and teaching and learning. He holds a Professional Engineer license in New York.

Degrees

• BS, Aerospace and Ocean Engineering, Virginia Tech, 1986
• MS, Mechanical Engineering, Montana State University, 1993
• PhD, Mechanical Engineering, Rensselaer Polytechnic Institute, 2003

John joined the Benedictine Engineering faculty in 2021. He earned a Bachelor of Science degree in mechanical engineering from the University of Missouri – Rolla (now Missouri S&T). After a few years in industry, he returned to school and earned his master’s degree in mechanical engineering from Purdue University. John worked in the electric power industry for 33 years, holding multiple positions in engineering and management, before retiring in April 2021.

John’s work experience has included energy conversion, thermal cycles, fluids, controls, rotating machinery, water treatment, and extensive project management. He is a registered Professional Engineering (PE) in Missouri and certified as a Project Management Professional (PMP) with the Project Management Institute.

Degrees

• BS in Mechanical Engineering, University of Missouri – Rolla, 1985
• MS in Mechanical Engineering, Purdue University, 1989

Dr. Downs earned B.S. and M.S. degrees in electrical engineering from the South Dakota School of Mines and Technology in 2010 where his work focused on additive manufacturing of passive microwave circuits and antennas. After graduation, Dr. Downs worked as a nuclear engineer for Puget Sound Naval Shipyard in Bremerton, Washington. Tiring of the rain, he returned to the Midwest to work as a project engineer for Interstates Control Systems in Sioux Center, Iowa. Four years later, and unable to neglect a call to teach, Dr. Downs entered graduate school at Iowa State University.

While at Iowa State, Dr. Downs helped develop an improved method of multi-mode dispersion compensation for ultrasonic guided wave NDT (nondestructive testing). Dr. Downs’s research interests are many, but he has a particular interest in wave phenomena – both electromagnetic and elastic. Other interests include, reconfigurable and ultra-wideband antennas, sensor design and the scholarship of teaching and learning.

Degrees

• BS, Electrical Engineering, South Dakota School of Mines and Technology, 2008
• MS, Electrical Engineering, South Dakota School of Mines and Technology, 2010
• PhD, Electrical Engineering, Iowa State University, 2021

Dr. Strandquist graduated from Benedictine College with a degree in Chemistry and a degree in Chemical Engineering from University of North Dakota in 2018. After graduation, she pursued her doctorate in Agricultural and Biological Engineering from Pennsylvania State University. During her graduate research she worked with the Department of Energy’s Center for Bioenergy Innovations as well as collaborated with Iowa State University on a USDA-NIFA funded project (C-CHANGE). Her expertise is in conversion of plant material to renewable natural gas using mixed microbial communities. Dr. Strandquist received her doctorate in 2022 before joining the engineering faculty at Benedictine College.

Degrees

• BS, Chemistry, Benedictine College, 2018
• BS, Chemical Engineering, University of North Dakota, 2018
• PhD, Agricultural and Biological Engineering, Pennsylvania State University, 2022

Tony joined the Benedictine School of Engineering in 2022. He comes from Collins Aerospace where he worked as a Senior Electrical Engineer. At Collins, Tony spent his time designing and troubleshooting electronic systems used on commercial aircrafts. His experience includes flight control systems, cabin electronics, and electromechanical systems. Tony holds a B.S. and M.S. in electrical engineering from LeTourneau University where he also worked as a research and teaching assistant.

Degrees

• BS, Electrical Engineering, LeTourneau University, 2015
• MS, Electrical Engineering, LeTourneau University, 2016

Deacon Hirl graduated from the University of Notre Dame in 1987 with a bachelor’s degree in civil engineering. Following graduation, he was commissioned an officer in the US Navy and served aboard the nuclear submarine USS PITTSBURG (SSN-720). In 1993, Dn Hirl returned to the University of Notre Dame to pursue a doctoral degree in civil engineering focusing on biological waste treatment and bioremediation. Following graduation, he has taught at the University of Illinois Chicago, the University of Minnesota, and University of St Thomas. Dn Hirl has been a practicing professional engineer for the past 25 years working on projects from bioremediation of soil and groundwater, to treatment of industrial wastewater, and renewable energy. His experience spans the full gamut of engineering from process development, laboratory studies, pilot studies, conceptual/preliminary design, detailed design, construction, commissioning, startup, operation, and troubleshooting. Dn Hirl has received patents for the integration of anaerobic digestion into ethanol facilities for improved energy efficiency. He was ordained a permanent deacon in the Catholic Church in 2017.

Degrees

• BS in Civil Engineering, University of Notre Dame, 1987
• PhD in Environmental Engineering, University of Notre Dame, 1997

Bridget Schabron has a B.S. degree in mechanical engineering from the University of Wyoming and an M.S degree in biomedical Engineering from Wichita State University. She comes to Benedictine from medical device company Vantage MedTech (in Lenexa), where she was a systems engineer. She has worked over 10 years in various industries as an engineer, from printer design, to academic research support, to oil and gas, to biomedical. Her most recent medical device work involved RF Generators, ultrasound, and pumps. Bridget has several publications and conference papers.

Degrees

• B.S. in Mechanical Engineering, University of Wyoming
• M.S. in Biomedical Engineering, Wichita State University

Sean Bauer is a 1986 graduate of Benedictine College, with a BA in Physics. Sean has been working in the Benedictine College Physics and Engineering Labs since 2009. He has over 25 years of experience working as an engineer for a small manufacturer of electronic instruments in Atchison, Kansas.

Degrees

• BA in Physics, Benedictine College, 1986

Charlene Smith graduated from Kansas State University with a B.S. in Industrial Engineering in 1992 and a M.S. in Industrial Engineering, specializing in engineering management, in 2002.  She started her career at Atchison Casting where she focused on the core manufacturing process. She later went on to practice engineering at Yellow Freight’s corporate headquarters where she worked extensively with process improvements. In 2010, she co-founded Young Minds At Play, where she designed educational toys and materials. Her designs have won Dr. Toy and Creative Child Awards. She has been teaching engineering at Benedictine since 2017.

Degrees

• B.S. in Industrial Engineering, Kansas State University, 1992
• M.S. in Industrial Engineering, 2002

Roberto Rojas is the owner of manufacturing businesses, including Kansas Metals, in the US and overseas. He developed the patented screen used in water wells and is the winner of several international awards. Roberto Rojas has extensive professional Engineering, Managerial, and Entrepreneur experience in the US and internationally. Roberto Rojas is multilingual and a competitive swimmer. His wife Maria (known as Mecha) is an accomplished canon lawyer who also teaches history to homeschool children in town. They have four children, two of whom attend Benedictine College. Roberto Rojas is involved with the Boy Scouts in Atchison, KS.

Degrees

• B.S. Mechanical Engineering, Florida International University
• M.S. Mechanical Engineering, Virginia Tech